USB5744BT-I/2GX01
USB5744 four-port hub controller
Request the USB5744BT-I/2GX01 ordering code shown on our shipment label. ICstoq helps manufacturing buyers check exact device identity, available lot details and independent inspection before placing a stock order.
- Manufacturer
- Microchip
- Technical information
- Manufacturer reference
Check the exact order code.
Start with the approved part on your BOM. Then confirm the lot, packaging and delivery requirements for your purchase.
Open manufacturer informationPreserve the full code
The photographed distributor label records USB5744BT-I/2GX01. Include every suffix in the enquiry; do not shorten it to USB5744i.
Check the X01 configuration
Microchip defines X01 as Hub Feature Controller disabled. The ordering key identifies T as tape and reel, I as the industrial temperature range, and 2G as 56-pin VQFN. Keep the complete approved code when requesting stock.
Carrier and moisture protection
The shipment includes carrier-tape, labelled packaging and moisture-protection materials. State whether your assembler accepts a split reel or requires factory-sealed packaging.
Match the part to your BOM.
Keep the manufacturer’s full identifier when requesting a quotation. A package, grade or delivery suffix can distinguish a different ordering option.
USB5744BT-I/2GX01
- Manufacturer
- Microchip
- Series
- USB5744
- Device package
- 56-VQFN, 7 × 7 mm
- Package code
- 2G
- Pins / terminals
- 56
For a different suffix, send the exact code you need. Related devices require your engineering approval.
What matters for your lot?
Tell us which lot conditions matter for your order. Add packaging, origin or inspection requirements in your enquiry.
You can add packaging, origin and inspection requirements in the enquiry.
Manufacturer details
for your purchasing review.
Compare these reference details with your approved BOM. Follow the source for the complete specifications and test conditions.
- Package option
- 2G: 56-pin VQFN, 7 × 7 mm
Manufacturer source - X01 configuration
- Hub Feature Controller disabled
Manufacturer source - Silicon revision reference
- B-step support; retain the complete BOM code
Manufacturer source - Manufacturer standard packaging
- T suffix: tape and reel
Manufacturer source - Manufacturer operating range
- I suffix: −40 to +85 °C industrial
Manufacturer source
Standard pack quantities describe manufacturer packaging. Available quantity, lot condition and any split-pack requirements are confirmed with your quotation.
Need stock for your next build?
Tell us how many and when. We will confirm available lot details, price, inspection arrangements and delivery in your quotation.
From our shipment records.
The DigiKey label and laboratory-bound package identify the full USB5744BT-I/2GX01 ordering code. The photographs also show the carrier and protective packaging.
Independent inspection before shipment.
We supply new, original components and send each supplied lot for third-party inspection. The laboratory, sampling and test scope are agreed for your order.
What can be checked?
Packaging, markings, package condition and dimensions can be reviewed against the required scope. X-ray, resurfacing checks and electrical testing are arranged where the device and acceptance requirements call for them.
Can I choose the laboratory?
Yes. Tell us your preferred independent laboratory or receiving test centre before ordering. We will agree the routing, required checks and report arrangements with you.
Which documents will I receive?
Request the offered lot’s label photographs, available source documentation and agreed inspection report. Review the tested samples, methods, findings and acceptance conclusion together.
Read the markings before you confirm the lot.
Distributor packaging label
Microchip
USB5744BT-I/2GX01
Select a marker on the image or a number below. Each field answers a different purchasing question.

Manufacturer versus distributor code
MFR PN is the Microchip identifier. The longer PN above is a distributor catalogue code and includes its own fulfilment suffix.
Lot and date
The date and lot occupy separate fields. Keep both when asking for one-lot material or checking whether a split shipment meets your receiving rules.
Seal timestamp
This is the distributor’s seal record. It does not establish the silicon manufacturing date or the entire storage history.
Moisture handling
Read the handling line alongside the applicable conditions and package record. Repacking may require additional handling evidence.
Pack quantity
The illustrated distributor pack carries its own quantity. A distributor cut-tape count is not the manufacturer’s standard full-reel quantity.
For this USB hub, retain /2GX01 and confirm the accepted carrier, lot and moisture-handling record.
Discuss this requirement ↗See what an inspection record contains.
Explore actual report details, then tell us which checks your incoming quality team requires.
Protective packaging
AD5535BKBCZ · packaging, humidity indicator and desiccant · report page 6.
Report example · Acceptable overall
Marking and resurfacing checks
AD5535BKBCZ · chemical and mechanical checks · report page 8.
Report example · Acceptable overall
Measured package dimensions
AD5535BKBCZ · three measured samples and data log · report page 13.
Report example · Acceptable overall
These excerpts show how inspection findings are documented. Your order’s report follows the agreed part, lot, sample plan and test scope.
Application illustration · USB5744BT-I/2GX01 shipment photograph. Confirm the device against your approved design.
Where the device fits.
For USB hubs, docks and embedded peripheral designs using USB5744BT-I/2GX01, send the exact code and production quantity. Packaging and inspection requirements can be included in the quotation review.
For a build with several component shortages, send the BOM so we can review the requirements together.
Instrument USB interfaces
USB expansion for docks, peripheral boards and industrial computing equipment. Where your instrument uses USB5744, keep the hub ordering option and packaging requirement with the enquiry.
USB hubs, docks & industrial PCs
USB expansion for docks, peripheral boards and industrial computing equipment. USB expansion is a separate board function. Manufacturers of hubs, docks and peripheral boards can request the specified USB5744 option and associated power components.
Related component enquiries.
Explore devices for related boards and power stages. These links are not a list of interchangeable replacements.
Send your USB5744BT-I/2GX01 requirement.
Exact order code, quantity and delivery date. We will take it from there.

