Skip to content
Independent electronic component distributionChina supply. International business.[email protected]

XCKU5P-1SFVB784E

Kintex UltraScale+ FPGA

Need XCKU5P-1SFVB784E for an approved FPGA board? Send the complete code and required quantity. We review inventory and established China supply channels, with lot details and inspection arranged before delivery.

Manufacturer
AMD / Xilinx
Technical information
Manufacturer reference
XCKU5P-1SFVB784E — kintex tray and devices. Actual shipment photograph.

Check the exact order code.

Start with the approved part on your BOM. Then confirm the lot, packaging and delivery requirements for your purchase.

Open manufacturer information

Exact package

SFVB784 is a 23 × 23 mm package with 0.8 mm pitch. Its GTY serial-rate limit is 12.5 Gb/s; do not apply the family’s higher headline rate to this package.

Speed and temperature grade

Keep -1 and E in your request. E denotes the extended junction-temperature range of 0 to +100 °C. Ask your engineering team to approve any different speed or temperature grade before revising the requirement.

Lab destination

The underlying label on the supplied shipment photograph identifies GETS Florida. Use the recorded laboratory destination when reviewing the shipment documentation.

Match the part to your BOM.

Keep the manufacturer’s full identifier when requesting a quotation. A package, grade or delivery suffix can distinguish a different ordering option.

XCKU5P-1SFVB784E

Manufacturer
AMD / Xilinx
Series
Kintex UltraScale+
Device package
SFVB784, 23 × 23 mm
Package code
SFVB784
Pins / terminals
784
Manufacturer reference for XCKU5P-1SFVB784EManufacturer reference for XCKU5P-1SFVB784E

For a different suffix, send the exact code you need. Related devices require your engineering approval.

What matters for your lot?

Tell us which lot conditions matter for your order. Add packaging, origin or inspection requirements in your enquiry.

What to specify

Tell us whether you need a full reel, tray, tube or a specific date-code window. Device package names such as SOIC or BGA describe the component itself; they do not confirm a lot’s carrier or seal.

What to specify

China is our supply market. If country of origin is part of your purchasing specification, tell us the requirement so we can review the available lot documentation. A manufacturer’s location does not determine a particular lot’s origin.

What to specify

Specify the checks and documents your team needs before shipment. Review the report’s part number, lot identification, sample scope and conclusion against the offered goods.

You can add packaging, origin and inspection requirements in the enquiry.

Manufacturer details
for your purchasing review.

Compare these reference details with your approved BOM. Follow the source for the complete specifications and test conditions.

Package and pitch
SFVB784 · 784 pins · 23 × 23 mm · 0.8 mm pitch
Manufacturer source
Speed grade
-1E; preserve both speed and temperature suffixes
Manufacturer source
Package-dependent serial rate
SFVB784 GTY line rate limited to 12.5 Gb/s
Manufacturer source
Manufacturer operating range
E: 0 to +100 °C junction temperature
Manufacturer source

Keep the full device, speed, package and temperature code on your request. Available lots, packing condition and inspection scope are confirmed with your quotation.

Need stock for your next build?

Tell us how many and when. We will confirm available lot details, price, inspection arrangements and delivery in your quotation.

Your part and quantity will carry through to the enquiry form.

From our shipment records.

Tray and packaging photographs show the XCKU5P shipment. The printed laboratory destination identifies GETS Florida.

XCKU5P-1SFVB784E — laboratory submission record addressed to GETS Florida. The printed intake reference is 161669-R1.
XCKU5P-1SFVB784E — laboratory submission record addressed to GETS Florida. The printed intake reference is 161669-R1.

Independent inspection before shipment.

We supply new, original components and send each supplied lot for third-party inspection. The laboratory, sampling and test scope are agreed for your order.

What can be checked?

Packaging, markings, package condition and dimensions can be reviewed against the required scope. X-ray, resurfacing checks and electrical testing are arranged where the device and acceptance requirements call for them.

Can I choose the laboratory?

Yes. Tell us your preferred independent laboratory or receiving test centre before ordering. We will agree the routing, required checks and report arrangements with you.

Which documents will I receive?

Request the offered lot’s label photographs, available source documentation and agreed inspection report. Review the tested samples, methods, findings and acceptance conclusion together.

Our quality process
White Horse inspection report example · analysis and sample results.
How to read an inspection report

Read the markings before you confirm the lot.

Laboratory submission label

AMD / Xilinx
XCKU5P-1SFVB784E

Select a marker on the image or a number below. Each field answers a different purchasing question.

XCKU5P-1SFVB784E · Laboratory submission label · supplied photograph
Select a numbered field to read it.
Laboratory submission label · XCKU5P-1SFVB784E. Supplied photograph.
FIELD 01 / 04

Submitted part

XCKU5P-1SFVB784E

The P/N on this laboratory submission record identifies the material sent for review. Reconcile it with the original manufacturer label and the issued report.

For your orderRequest the manufacturer ordering code and report identity.

Retain -1, SFVB784 and E. Confirm lot age and handling, then agree any FPGA configuration and functional-test conditions.

Discuss this requirement ↗

Explore more label examples ↗

Application illustration · XCKU5P-1SFVB784E shipment photograph. Confirm the device against your approved design.

Where the device fits.

Building or maintaining a board with XCKU5P-1SFVB784E? Send the full ordering code and quantity so supply can be reviewed against the package and grade required by your design.

For a build with several component shortages, send the BOM so we can review the requirements together.

Frame capture & acquisition boards

For frame-grabber and acquisition boards already designed around XCKU5P, keep SFVB784 and -1E on the request. Review the package-specific transceiver limit against the validated board design.

Acquisition & instrument control

Instrument acquisition and signal-processing boards depend on the FPGA configuration and timing already approved for production. Share the complete part code, build quantity and any single-date-code requirement.

Network & communications boards

For communications boards with programmable data paths, source against the exact FPGA and package on your BOM. Family-level transceiver figures do not establish the performance of SFVB784 or your finished board.

Related component enquiries.

Explore devices for related boards and power stages. These links are not a list of interchangeable replacements.

Send your XCKU5P-1SFVB784E requirement.

Exact order code, quantity and delivery date. We will take it from there.

Request a quote

Compare the family requirement.

Review the relevant package, operating and application decisions before accepting a different code.

Image detailFit to view